6ES7134-4GB11-0AB0

New products are only 20% off

Customer Support

+8618000000000

6ES7134-4GB11-0AB0

★ ★ ★ ★ ★ 4.9 0 Reviews

You May Also Like

Please enter your description of this module so that customers can better understand it.

Selling List

Description Reviews

6ES7134-4GB11-0AB0 ET200S, EL-MOD., 2AI STD I-4DMU, 0-20MA,

Artikelnummer

6ES7134-4GB11-0AB0

		SIMATIC DP, ELECTRONIC MODULE FOR ET 200S, 2 AI STAND. I-4DMU 15 MM WIDE, +/-20MA; 13 BIT + SIGN,4 .. 20MA; 12 BIT FOR 4-WIRE TRANSDUCER CYCLE TIME 65 MS/CHANNEL WITH LED SF (GROUP FAULT)
Supply voltage
Load voltage L+
● Rated value (DC)		24 V; From power module
Input current
from load voltage L+ (without load), max.		30 mA
from backplane bus 3.3 V DC, max.		10 mA
Power losses
Power loss, typ.		0.6 W
Address area
Address space per module
● Address space per module, max.		4 byte
Analog inputs
Number of analog inputs		2
permissible input current for current input (destruction limit), max.		40 mA
Cycle time (all channels) max.		Number of active channels per module x basic conversion time
Input ranges
● Voltage		No
● Current		Yes
● Thermocouple		No
● Resistance thermometer		No
● Resistance		No
Input ranges (rated values), currents
● -20 to +20 mA		Yes; 50 Ohm
● 4 to 20 mA		Yes; 50 Ohm
Cable length
● Cable length, shielded, max.		200 m
Analog value creation
Measurement principle		integrating
Integration and conversion time/resolution per channel
● Resolution with overrange (bit including sign), max.		14 bit; +/-20 mA: 14 bits, 4 to 20 mA: 13 bits
● Integration time, ms		16,7 / 20 ms
● Interference voltage suppression for interference frequency f1 in Hz		60 / 50 Hz
● Conversion time (per channel)		65 ms; 55 / 65 ms
Smoothing of measured values
● Parameterizable		Yes; In four stages by means of digital filtering
● Step: None		Yes; 1 x cycle time
● Step: low		Yes; 4 x cycle time
● Step: Medium		Yes; 32 x cycle time
● Step: High		Yes; 64 x cycle time
Encoder
Connection of signal encoders
● for current measurement as 2-wire transducer
— Burden of 2-wire transmitter, max.		750 Ω
Errors/accuracies
Linearity error (relative to input range), (+/-)		0.01 %
Temperature error (relative to input range), (+/-)		0.005 %/K
Crosstalk between the inputs, min.		-50 dB
Repeat accuracy in steady state at 25 °C (relative to input area), (+/-)		0.05 %
Operational limit in overall temperature range
● Current, relative to input area, (+/-)		0.6 %
Basic error limit (operational limit at 25 °C)
● Current, relative to input area, (+/-)		0.4 %
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
● Series mode interference (peak value of interference < rated value of input range), min.		70 dB
Isochronous mode
Isochronous operation (application synchronized up to terminal)		No
Interrupts/diagnostics/status information
Diagnostic messages
● Wire break		Yes; Measuring range 4 to 20 mA only
● Group error		Yes
● Overflow/underflow		Yes
Diagnostics indication LED
● Group error SF (red)		Yes
Parameter
Remark		4 byte
Diagnosis: wire break		Disable / enable (only in measuring range 4 to 20 mA)
Measurement type/range		deactivated / +/-20 mA / 4 to 20 mA
Group diagnostics		Disable / enable
Overflow/underflow		Disable / enable
Galvanic isolation
Galvanic isolation analog inputs
● between the channels		No
● between the channels and the backplane bus		Yes
● between the channels and the load voltage L+		No
Isolation
Isolation checked with		500 V DC
Dimensions
Width		15 mm
Height		81 mm
Depth		52 mm
Weights
Weight, approx.		40 g
last modified:		25.09.2014

★ ★ ★ ★ ★

12 Views

5 star 0 (0%)

4 star 0 (0%)

3 star 0 (0%)

2 star 0 (0%)

1 star 0 (0%)

Reviews

all_reviews（0） Image/Video（0） star（0）

Picks for you

DISCLAIMER: We are an independent distributor of industrial automation products. We are NOT an authorized partner, representative, or distributor for any brands listed. All trademarks and logos are the property of their respective owners.